Ashly Compressor/Limiter CL-52 Manual de usuario descargar pdf (Pagina 2)

Specifications

CONTROLS

stereo tie switch

defeat switch

gain:

ratio:

attack time:

release time:

output:

Detector Patch Point:

Maximum Input/Output Level:

Input Impedance:

Output Impedance:

Frequency Response:

Distortion:

Hum and Noise:

Power Requirements:

Size:

Shipping Weight:

Block Diagram

Many interesting and productive effects can be

achieved by combining the CL-50E or the CL-52E with

Ashly’s SG-33E or SG-35E Noise Gates.

(CL-52E ONLY)

±30dB

2:1-<»

200mS. - 20mS.

lOOmS - 2Sec.

-40dBV - +20dBV

allows the connection of an EQ for

frequency selective limiting

+20dBm

lOkQ balanced bridging

50ii term, w/ 600£2 or more

±.2dB 20Hz - 20kHz

<•015% THD, OdBV 20 Hz • 20kHz, no limiting

<•15% +i8dBV worst case

-95dBV unity gain

120 VAC, 50-60HZ, 5W

19" L X 1 3/4"H X 6"D

8lbs

Architect’s Specification

The unit shall be a single (CL'50E) or dual (CLr

52E) channel compressor/limlter with indepen

dent attack, release and ratio adjustments. It

shall have detector patch points which allow con

nection of an external equalizer in the detector

loop to produce frequency selective limiting. It

shall have front panel mounted switches for

engaging/ defeating the compressor/llmiter func

tions. Performance specifications of a typical

production unit shall meet or exceed the follow

ing: Gain control shall be +30dB. The ratio shall

be adjustable from 2:1 to «. The attack time shall

be adjustable from 200^iS to 20mS. The release

time shall be adjustable from lOOmS to 2 sec

onds. The output shall be adjustable from -40dBV

to ■i-20dBV. The maximum in-out level shall be

+20dBm, The input impedance shall be lOkii bal

anced bridging. The output impedance shall he

50£2 terminated with 60011 or more. The frequen

cy response shall be 20Hz to 20kHz l.ZdB.

Distortion shall be <.015% THD @ OdBV from

20Hz to 20kHz with no limiting, <.15% @4^1SdBV

worst case. Hum and noise shall not exceed -

90dBV @ unity gain. The unit shall operate at

115VAC ±5%. 50-60HZ. The unit shall be

designed for mounting in a standard ElA 19'' rack

(19'"L X 1.75"H X 6"D) and shall have a shipping

weight of 8 lbs. The imit shall be either a model

CL-50E (single channel) or a CL-52E (dual chan

nel) Compressor/Limiter manufactured by Ashly

Audio Inc. No other unit shall be acceptable

unless submitted data from an independent

research lab verifies that the above slze/perfor-

mance specs are met.

Ashly Audio Inc.

ASHLY

Since 1972

© 1990 Ashly Audio

1 2

Comentarios a estos manuales

Sin comentarios